About Me

Latest Posts

3 Tips For Updating An Older Patio With The Right Glass Door
7 August 2020

Updating an older patio can be a challenge when it

Key Considerations When Acquiring A Crane For Your Next Project
22 June 2020

Taking on a major construction project that requir

3 Signs You Need Your Foundation Repaired
7 April 2020

The foundation on your home is very important; it'

Overlooked Steps When Building A Custom Home
14 February 2020

When you are in the early stages of preparing to b

Is Translucent Concrete Right For Your Project?
21 January 2020

When you think of concrete, "translucent" is unlik

Asphalt Seal Coat Installation Tips

Asphalt is one of the most popular materials for residential driveways--and for good reason. Not only is it attractive, but it also has a long lifespan and an attractively low price point. Yet to get the most out of your asphalt surface, it is important to protect it with seal coat, a liquid that acts to refresh and rejuvenate the asphalt, ensuring that it will last you for years to come.

Many homeowners elect to undertake the seal coat application process themselves. While this is a great way to help keep your costs down, it is important that you understand a few key things. If you have plans to seal coat your driveway, read on. This article will provide you with three helpful tips to ensure the process is a success.

Don appropriate work gear.

Seal coat is a petroleum-based chemical liquid that--to put it lightly--is not the best thing for human skin. For that reason, it is important to wear work clothes that will minimize the chances of contact. That means long pants, long sleeves, and a thick pair of rubber gloves.

When selecting your outfit, it is also good to be aware that you are in for a pretty messy job. In other words, don't wear your favorite pair of blue jeans unless you don't mind the idea of throwing them away at the end of the day. Wearing old--and hence disposable--clothes will save you the time-intensive struggle of trying to remove all of those seal coat chemicals in the wash.

Ensure your asphalt is properly prepared.

In order to fully penetrate and bond with your asphalt, it is important the surface be as clean as possible. The more dirt, dust, and oil that is present, the less effectively the seal coat will be able to bond with the asphalt. As a result, your driveway will enjoy a much less reliable measure of protection.

Begin by thoroughly sweeping off the surface with a push broom. Next remove any oil splotches or stains with a stiff brush and some sudsy water. Finally, rinse off your driveway with a garden hose or, if you have one, a pressure washer. Allow the asphalt to dry for several hours before moving on to the next step.

Fill in any cracks or potholes.

Any breaks in the continuity of your asphalt surface will reduce the effectiveness of the seal coat. That's because such cracks and potholes will accumulate water, which in turn will lead to an accelerated process of degradation. Therefore, it is vital that you patch any damaged areas before proceeding. A cold patch asphalt compound is the simplest way to accomplish this task on your own. 

If after reading this you're unsure of sealing asphalt, visit a site like http://www.lakeridgepaving.com to learn more paving services.